Maintenance and installation of the filling machine

        1. Unified specifications of Yira bottle, bottle cushion, and plugs

        2. Before driving, you must use a swinging handle to rotate the equipment to check whether the rotation is different.

        3. When regulating the equipment, the dedicated tools should be appropriately applied to use too large special tools or excessive force to disassemble parts to prevent destruction parts or hazardous equipment characteristics

        4. After the device is carried out, the loose screw must be tightly tightened. After the handle rotation equipment is used to check whether the posture is in accordance with the regulations, it can drive

        5. The equipment must be kept clean. It is forbidden to have oil stains, potions or mezzanine fragments on the equipment to prevent equipment damage. Therefore, it must be:

        ⑴ During the production process, the device immediately has the potion or the graphics of the gradient.

        备 Clean up the surface of the equipment once before the transfer, and add the cleaned grease in each theme activity unit.

        (3) It should be cleaned once a week, especially for areas that are not easy to clean up in the usual application or wipe them clean or blow with air.